· Three-way frequency surround speaker system
· It can connect more units by parallel output
· Level scattering Angle is 100 degrees, vertical scattering Angle is100 degrees
· It has a quick installation trestle for fast, simple and safe installation
· High power load bearing strength has optimized for the digital sound reproducing
· It has an adjustable hanger-bearing structure for simple installation, and a wide compass and smooth acoustic covering
CPS4283 is a tri-dividing frequency surround speaker system with high sensitivity, wide reproduction frequency, and uniform acoustic covering. It is perfect for medium and small sized cinemas. It has an adjustable hanger-bearing structure for simple installation and has a wide compass and smooth acoustic covering, which can faithfully reproduce the atmosphere of the environmental sound in digital-sound movies. It will be the best choice for digital movie surround reproducing.
|
technical parameters
|
CPS4283
|
||
|
Frequency response
|
50-20KHz(-6dB)
|
||
|
Coverage angles
|
100 º×100 º(H×V)
|
||
|
|
Woffer
|
Medium frequency speaker
|
High frequency drive
|
|
Unit model
|
PW809
|
HW504
|
PD2203
|
|
transducer
|
One Φ 220 mm high efficiency low frequency speakers, Φ 36.5 mm KAPTON skeleton voice coil,, Φ 126 mm strontium qualitative magnets.
|
One Φ145 mm high efficiency low frequency speakers, Φ 19 mm KAPTON skeleton voice coil,, Φ70 mm strontium qualitative magnets.
|
Φ 25 mm titanium coating compression drive structure, KAPTON skeleton rectangular section copper coated aluminium wire voice coil,, Φ 70 mm strontium qualitative magnets.
|
|
Nominal impedance
|
8Ω
|
||
|
sensitivity 1w/1m
|
92dB
|
||
|
Rated Input Power
|
150W
|
||
|
Maximum input power
|
300W
|
||
|
Maximum SPL
|
116.8 dB
|
||
|
Connection
|
2 metal connecting terminals, the biggest standard wire is 6 mm2.
|
||
|
dimensions
|
500mm×480mm × 270mm (H×W×D)
|
||
|
Net weight
|
14kg
|
||
PS:
1. All listed frequency ranges are measured in free sound field. (half space, 2 PI)
2. The pressure level can be calculated in 1 meter, the speaker is rated continuous power output, the signal source is pink noise, within the designated frequency range.
3. Maximum output power test meets IEC268-5 recommend standard, 50 Hz-20 KHz bandwidth, 6 dB signal peak factor.